No hay artículos en el carro
No hay artículos en el carroBob
Comentado en los Estados Unidos el 26 de marzo de 2025
Easy to install, works great. Be sure to check model number located inside tank.
Veteran M.
Comentado en Canadá el 7 de enero de 2025
The thickness of the foam gasket makes it hard to install. Ive replaced several of these over the years.Pro tip: simply remove the red flapper temporarily while installing the black plastic body. Push straight down with the palm of your hand and lean into it with your body weight to compress the sponge gasket. Thats when you are in a position to rotate the black plastic body into a locked position.Now your seated and locked in place . Now put the red flapper back on . GLTA
Fernando
Comentado en México el 1 de marzo de 2024
Conforme con lo que se pidió y su tiempo de llegada fue antes buen servicio
donald smith
Comentado en Canadá el 18 de diciembre de 2024
Exactly what I was looking for. Easy to install
Tao
Comentado en Canadá el 2 de septiembre de 2024
Very fast delivery, completely authentic. The installation is also very simple, that is, the installation needs to use a lot of force to press the rubber ring into the rotation is a little laborious, in order to seal well.
Rubí Ramos
Comentado en México el 12 de septiembre de 2024
quiero otras 2 pzas por favor
Claudia Saldaña
Comentado en México el 8 de julio de 2023
Mis Baños jalaban muy poca agua y tenía que hacerlo hasta dos veces , cambié a este producto y se va el agua Perfecto
MIGUEL REBOLLEDO
Comentado en México el 14 de julio de 2023
funciono a la perfección
Michael &Tulay C
Comentado en los Estados Unidos el 5 de mayo de 2023
I liked the kit of the tower and gasket. I did not like the fact the instruction sheet was a different model or part and did not match how to install unit properly.Like all the rest of the reviews, the gasket going to the bottom of the tank had to be really compressed the allow turning the tower into proper position. I read some of the reviews and found this to be the same problem.After several attempts to push down and compress the gasket I gave up and found two scrap boards in my garage and put the gasket between them. I used a heavy duty C-Clamp and compressed the gasket as far as it would go. Waiting about 15 Min before releasing.During that time, I put vegetable oil on the ceramic triangle hole just the bottom of the hole not the top.After releasing the C-Clamp, I put the gasket on the tower and some vegetable oil on the three protruding stands of the tower.It slid right in and I was able to push down and turn the tower to the correct position.Worked great and saved a lot of cussing.A better instruction or correct instruction sheet should be made for this model.
NICOLAS
Comentado en México el 22 de octubre de 2023
EXCELENTE
Leonarda vazquez
Comentado en México el 25 de agosto de 2022
Quedo muy bien
Cliente de
Comentado en México el 22 de febrero de 2021
Me gustó, pero creo que la paquetería usa mucho material que no es biodegradable y contamina mucho al planeta.Hay que proteger al planeta
Héctor Vega Yo Mero HH
Comentado en México el 2 de febrero de 2021
Llego en el paquete en su original de Kohler, fue fácil instalación y rápida, ya quedo funcionando sin fugas.
Productos recomendados