Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Llave para correa de tubo, capacidad ajustable de 12 pulgadas

Envío gratis en pedidos superiores a Mex $600.00

Mex $310.00

Mex $ 164 .00 Mex $164.00

En stock

Acerca de este artículo

  • Llave de correa de alto rendimiento: diseñada con precisión y durabilidad, esta llave de cinturón es ideal para apretar o aflojar varios objetos, incluyendo filtros de aceite, tuberías, tarros y accesorios.
  • Llave de correa ajustable: la llave de correa ajustable se adapta a objetos de hasta 6 pulgadas de diámetro, proporcionando la máxima flexibilidad. Diseñado con correas de nailon de alta calidad y asas de aleación de aluminio, adecuado para tareas de alta resistencia
  • Mango ergonómico antideslizante: con un mango ergonómico y diseño antideslizante, es seguro de usar incluso en condiciones húmedas o grasas.
  • Amplia gama de aplicaciones: llaves de correa perfectas para reparaciones de fontanería, mantenimiento automotriz, cambios de filtro de agua y proyectos de bricolaje en el hogar, por lo que es una herramienta imprescindible para profesionales y aficionados.
  • Diseño compacto y portátil: ligera pero resistente, esta llave de correa pequeña es fácil de almacenar y transportar. Ideal para cajas de herramientas, garajes y kits de emergencia.
  • La correa Dashengdianzi de 12 pulgadas está empaquetada en embalaje de alta calidad e impresa con el logotipo de Dashengdianzi



Descripción del producto

llave de correa de tubo

Llave de correa de 12 pulgadas

Llave de correa ajustable

Llave de correa ajustable

llave de correa de nailon

llave de correa resistente

llave de correa de nailon

correa de nailon llave de llave de alta resistencia


Tommy K
Comentado en los Estados Unidos el 22 de agosto de 2022
Had a stuck inboard outboard boat engine. Not seized just sat too long. All kinds of input on what to do from replacing the engine to taking it apart to putting a chain wrench on the crank pully and possibly damaging it. Engine would not turn with wrench on the nut. Then I found this tool. The strap was big enough to fit around the pully and there would be no damage. Able to work it back and forth and the engine was up and running fine!!!!
Customer
Comentado en los Estados Unidos el 31 de mayo de 2022
I bought this in a pinch to replace some filters on a cat engine. It held up so far replacing a few dozen really tight large filters. Only problem is that the nylon strap is a little slick and I need to put a rag under the strap to keep from slipping. Decent price and still working so not too many complaints
D. Blanding
Comentado en los Estados Unidos el 7 de septiembre de 2021
This simple wrench easily handles those large diameter (up to 12 inch) ring nuts that are too tight to turn with your bare hands. It even works if the ribs on the nut have been damaged by previous abuse. For example, it works perfectly to tighten/loosen all the nuts on this pool pump, including the union nuts on the piping and even the large FBT nuts that clamp the motor to the pump and, of course, the strainer lid.
Typhoon Jenkins III
Comentado en los Estados Unidos el 30 de diciembre de 2019
I have an ejector pump in my basement. The original one that came with the house when it was new took a dive. I replaced it with a better unit. The problem is I could never get the connection tight enough. They were constantly leaking. I got this to fix that issue. I tightened up the two connections using this strap wrench in about 30 seconds, and voila, everything is perfect again. Really sturdy wrench that should last several lifetimes. Very fast Amazon delivery too, as always.
RUSSELL BRIAN CROGHAN
Great tool, ideal strap wrench.
Productos recomendados

Mex $355.99

Mex $ 177 .00 Mex $177.00

4.7
Elegir

Mex $1,098.15

Mex $ 582 .00 Mex $582.00

4.5
Elegir

Mex $399.99

Mex $ 199 .00 Mex $199.00

4.9
Elegir