Ninonly Soporte Magnético para Cuchillos de 16 Pulgadas para Refrigerador, Tira de Cuchillos Magnética de Doble Cara de Prima Acero Inoxidable para Pared, Iman Para Barra de Cuchillos de Cocina

100% good

This magnetic works quite well. Sleek appearance and is easily fitted using either screws or (in our case) the double sided tape that is supplied.Knives attach well and dont fall off.Im considering buying another for my regular abode.Recommended.

Material and Finishing is good.Good fit and easy installation.

La barra tiene un imán bastante fuerte! Suficiente para cargar 7 de mis cuchillos sin problemas!

Se resbalan los cuchillos. No tiene al 100% el imantado. Hay q estar buscando la mejor posición para q no se resbalen

Se me hace super cómodo poner este porta cuchillos en un costado del refri, así no tengo que utilizar taladro en la pared.

De verdad siento que pensaron en todo para su instalación, tiene muchas de instalar dependiendo de tus necesidades. El imán de muy buena potencia y el tamaño excelente en lo personal compré el de 20 pulgadas. Muy vistoso en instalación de pared.

Exelente materialRealmente cubre mis necesidades.Lo recomiendo

EL TERMINADO ES EXCELENTE. MUY BONITO.

Ninoly 12" Stainless Steel Double Sided Professional Magnet Knife Strip.What's in the Box:InstructionsThe magnetic bar knife holder5 acrylic double sided adhesive pads (for non-metallic surface mounting)2 screws with plastic anchors (for more secure wall mounting)1 paper template to mark screw holes for wall mounting)4 rubber pads (for non-slip refrigerator mounting)A WORD OF WARNING: The magnetic force is strong in this one. Maybe not rare earth magnet strong but **very** strong, so be careful not to get your finger between in and the 'fridge. It literally leapt out of my hands and slammed on to the 'fridge with a scary loud . It was also very tough to remove.The magnetic bar is of average inexpensive but not quite cheap construction. The stainless steel sleeve is a thin but not flimsy gauge of brushed stainless steel. There are two keyholes on the back to set onto two provided screws.WALL MOUNTING (stick on):The instructions say to clean the wall surface and the back of the magnetic bar and dry it. The 12" bar gets four adhesive pads and the 16" bar gets five. Remove one side of the backing and stick the pads to the bar, remove the other side and stick the bar to the wall.For this to work and hold well, not only must the surface be clean but it must be **very** smooth, as in smooth as glass. Walls and cabinets that have the common eggshell surface will be a problem sooner or sooner.Warm the bar, stick the pads, warm the wall, stick, press, and hold. The instructions say to wait 24hrs before loading up the bar. (You probably don't need to hold it that long.)WALL MOUNT (more secure)Use the template to mark and drill two holes. Insert plastic anchors and install screws. Hang the bar and you're done.If possible, find a stud for one end of the 12" bar and maybe both ends for the 16" bar. The force required to separate a utensil from the bar isn't Herculean, but a metal object with a lot of surface area might weaken either the adhesive or screw mounting.The template will give the proper spacing for drilling the holes the anchors and screws.REFRIGERATOR MOUNT: I chose as the most secure and convenient. Using an alcohol pad, the back of the bar was cleaned and a peel-and-stick non-slip pad was applied to each end. The instructions read use one on each end leaving the other two as spares. Much more carefully this time, I aligned and placed the bar on the 'fridge without drama. With the foam pads, it was a little easier to adjust the location without pulling it off.I got this for keeping a few utensils handy, and not ubër expensive chef knives. I use a set of small Good Cook knives with plastic sheaths a lot that don't really store well in drawers. To my surprise they stick really well in the sheaths and are easy to remove and replace as needed. I was really happy about that.I have a couple of small spoons, maybe 1/4 tsp. that I use for inspecting my ice cream containers to make sure it's not going bad. It's a dangerous job but somebody's gotta do it. The pull of the bar is so strong that when they're placed on the bar vertically, they're twisted up horizontally. So it takes a bit of practice to find a position that keeps them vertical.This bar is well constructed, looks pretty good, and works very well. The only thing for me to do is put a piece of adhesive acrylic on the front surface. This is just personal preference, as lifting some of the items causes a metal on metal scraping (not knife edges) and that annoys me.So this is really well done product that I can easily recommend for its designed purpose.ONE MORE NOTE: Stainless steel is actually a broad range of metal alloys to make up various characteristics. This is to say some stainless steel items (like my spoons) **will** stick, and some won't. Most common metal kitchen knives are ferrous-based metal as are many kitchen utensils.THIS IS NOT in any way a compensated review and I didn't get this bar at any discount.

Luce muy estético, funcional, es muy fuerte y trae varias opciones para sujetarlo. En mi caso solo lo puse en la puerta del refri. Excelente

Product is not as good as they claim to be, endurable and will detach after few weeks